ここから本文です
TWO:Felipa thought it was not quite so bad as that, and she poured herself another cup of the Rio, strong as lye, with which she saturated her system, to keep off the fever.
Classification by type of system
1natural circulation external heating pipe type
2natural circulation calandria type
3forced circulation type
4falling-film type
5rising film type
6jacket type
7coil type
Classification by method of operation
1single effect evaporator system
2multiple effect evaporator system
3auto-vapor mechanical compression system
4auto-vapor ejector compression system
5multistage flash system

After taking into consideration of the physical and chemical property of solutions, the desired design conditions, and available utilities, we select the most suitable type of system by utilizing our years of experience and excellent results.
In addition, we can offer designs and manufacturing services that take into careful consideration compactness, energy-efficiency, and automatization.

THREE:"She was a captive among the Chiricahuas up in the Sierra Madre. She's had a hard time of it. That and the return march have been too much for her."

While standard calandria type evaporation systems are widely used as the typical concentration evaporator by the various food and chemical industries, we have delivered many of those systems as finishing concentration evaporators especially for sugar solutions and starch syrups.

THREE:
  • Enables flexible operation with little influence from variations in load and raw solution concentrations because of an adequate amount of solution being held within the system. These systems are also suitable for batch type burning evaporators.
  • Concentrations can be controlled within product specifications by the cascade control using the concentrations of concentrated solution and the raw solution supply and also by the arithmetic control of raw solution concentrations, etc. (Result for sugar solutions: 75±0.2wt%)
  • High-viscosity solutions and solutions that may crystallize can also be utilized by installing a propeller in the evaporator as a forced circulation system.
THREE:Felipa leaned against the tree under which they were, fairly protected from the worst of the storm;[Pg 101] and Cairness stood beside her, holding his winded horse. There was nothing to be said that could be said. She had lost for once her baffling control of the commonplace in speech, and so they stood watching the rain beat through the wilderness, and were silent.

This is a process example of a device that continuously and simultaneously concentrates two types of waste liquid with a single high-efficiency steam compressor.

THREE:Previous to his forty-ninth year, Plotinus wrote nothing. At that age he began to compose short essays on subjects which suggested themselves in the course of his oral teaching. During the next ten years, he produced twenty-one such278 papers, some of them only a page or two in length. At the end of that period, he made the acquaintance of his future editor and biographer, Porphyry, a young student of Semitic extraction, whose original name was Malchus. The two soon became fast friends; and whatever speculative differences at first divided them were quickly removed by an amicable controversy between Porphyry and another disciple named Amelius, which resulted in the unreserved adhesion of the former to the doctrine of their common master.415 The literary activity of Plotinus seems to have been powerfully stimulated by association with the more methodical mind of Porphyry. During the five years416 of their personal intercourse he produced nineteen essays, amounting altogether to three times the bulk of the former series. Eight shorter pieces followed during the period of failing health which preceded his death, Porphyry being at that time absent in Sicily, whither he had retired when suffering from the fit of depression already mentioned.
  • By evaporating the steam using a mechanical compressor and reusing it, almost no heating steam is alomost required except the time of start-up, so large energy savings can be expected.
  • By combining with a thin film falling heat exchanger that does not raise the boiling point due to the liquid depth, it is possible to utilize the temperature difference of the compressor at the maximum.
  • Since the residence time and heating time are short and the holding amount is small, starting and stopping can be performed in a short time.
  • It will prevent scale adhesion in the can that the evaporator is divided into two parts, and that the supply of the undiluted solution is alternately switched over a fixed period of time to perform heat concentration.